l33th41

Yes you can... but when you say: do you mean via a hub/switch or connect them directly to one another? It can be done either way but if you are connecting them directly to one another you will need a crossover cable. The easiest way possible would probably just to pick up a USB flash drive... They are pretty cheap now... I think I saw a 2GB one at Best Buy for $35

Nice! I don't blame ya for not wanting to corrupt OE2 data. (BTW...I can't wait for OE2 and Crysis!!!) I originally had a 3500+ @ 2.75 before I upgraded to the 4800+ My original plan was to get that 3800+ and overclock the hell out of it! But I ended up getting that 4800+ right when the Core 2's came out so the Athlon prices dropped like a rock. Here are my full specs/settings Motherboard: Asus A8R32-MVP Deluxe Chipset: ATI Crossfire Xpress 3200 Bios Revision: 404 CPU: Athlon 64 X2 4800+ Toledo Voltage: 1.4V Vcore OverVoltage: 200mV FSB: 270 Multiplier: 10x Core Speed: 2700MHZ HTT Multiplier: 4x HTT: 1080MHZ Heatsink: Thermalright XP-90C Fan: Panaflo 92mm Thermal Compound: Arctic Silver 5 Memory: 1GB OCZ Platinum Rev. 2 Memory Limit: 183 Speed: 245MHZ (DDR490) Voltage: 2.80V Timings: 2.5-3-3-8 Command Rate: 2T Video Card: MSI X1800XT 512MB Cooler: Arctic Cooling Accelero X2 Drivers: ATI6.11 Core Speed: 682MHZ Memory Speed: 792MHZ (DDR1584) Hard Drives: (2) Western Digital Raptors Size: 37GB RPM: 10,000 Interface: SATA150 Configuration: RAID0 Power Supply: Enermax Liberty 500W Modular Sound Card: X-Fi Fatal1ty Xtreme Gamer Prime95 Stable: Yes - 24 Hours CPU-Z Verified: Yes - Click Here to View

Just wondering if anyone out there enjoys pushing their system to the limits like I do... This is including CPU, GPU, and/or RAM overclocking! I'd like to see some specs, #'s, benchmarks, etc. ! -I currently have an Athlon 64 4800+ (939) @ 2.7Ghz Not a real good overclock in general.. but decent for this particular CPU as it is known to be a poor overclocker - My Memory is OCZ Platinum Rev. 2 (2X512) @ DDR490 with 2.5-3-3-8 2T Timings I know this memory can handle more but in my system I'm kinda stuck here because of my CPU - I also have an x1800XT 512MB running just short of Platinum Edition speeds

Whats this? Another Flip? Merry Christmas to all!

Excellent job! One small thing I noticed was that when adding just the lower rail, the stats are off the charts. Lower Rail with sight

AMD Dual Core Optimizer: http://www.amd.com/us-en/Processors/Techni...71_9706,00.html

Could possibly be your OC thats causing instability... Whats the 3800+ Stock 2.0Ghz?? Thats a pretty large overclock. Make sure your memory can handle the OC and make sure your not overheating. Set your clocks to stock just to verify..

This is happened to one of my friends as well... I believe we were running patch 1.21 at the time... I always blamed it on his lack of memory though (512MB)... guess that not the case He is running an AthlonXP 2600+ 512MB of PC2700 SpecTek memory Sapphire x1600 AGP

Yeah i was thinkin there might of been a whole different set of drivers, but if you follow the links it leads right to the 6.9's

Anyone having issues with these drivers? I have an MSI x1800xt 512MB and I'm not having any issues at all. However, one of my friends has an ATI All-In-Wonder x800xt and his having a horrible experience with these drivers. First, he couldn't install because he wasn't in administrator mode. He had to login under the actual administrator account even though he is an administrator of his PC. After finally getting it to install, his control center wouldn't launch. An uninstall via the ATI Uninstall utility and then a run of driver cleaner pro and then reinstalling the 6.9's fixed that. But now everytime he opens up windows explorer.. (I mean like opening my documents, or browsing your C:\), he is getting some sort of an error which prevents him from browsing folders. I guess I'll have him uninstall 6.9, clean out the drivers, and intall an earlier version of the catalysts. Anybody know of a good version of the catalysts that work well with the all-in-wonder cards?

Ati Catalyst 6.9 Drivers are out now... No specific fixes mentioned for GRAW but there seems to be a lot of crossfire issues resolved Release Notes

I'd go with a X850 256mb or a 6800 256mb. And make sure to have 1mb of mem. Before getting my x1800xt 512MB I had an x800xt 256MB and it played graw fine at 1024x768 and medium to high quality settings. And I hope you meant 1GB of memory

He did indeed post it in the tech section as I also posted in the same topic. I'm pretty much having the same 'Waiting For Server' issue that he is. I am trying to host a LAN game (play and host). My computer is very capable [Athlon 64 X2 4800+, 2GB OCZ Platinum Rev. 2, MSI X1800XT 512MB, 2 Western Digital Raptors in RAID0] and I have a fairly good upload speed of 2mb. (This line is dedicated to gaming only...I have a separate line for internet browsing for everyone else in the household.) When clients try to join they get stuck at the waiting for server screen for a good 5-10 minutes before they finally disconnect. A few connections attempts and 15 minutes later, one of the clients may actually get into the game. (This is in [GR] coop, haven't tested other game modes yet) I shall try setting up a dedicated server tonight and see if it works any better. Similar box (Athlon xp 2600+, 1GB Kington HyperX)

Experiencing similar problem. When joining a LAN game, I get stuck at Waiting for Server Screen for about 10 minutes or so and then it finally disconnects. Usually on the second or third try I can get in to the server but I still have to wait the 10 minutes. I get stuck again at the waiting for server screen upon a map change. I didn't have this problem in 1.21

Has anyone tried the 6.8 drivers yet? I seem to be having some problems with them. Ever since I installed them, after about 15-20 minutes of play GRAW freezes and minimizes and then the ATI vpu recovery window pops up stating something along the lines of "card not responding to driver requests". I can then click OK and I'm able to go back into the game no problem but only to have it happen again a little while later. Annoying as it is, it's bearable under single player, but when I host a LAN game and this occurs, it kicks all the other players due to the "server not responding". When I reverted back to the 6.7 drivers this no longer occurs. MSI x1800xt w/ Arctic Cooling Accelero X2

I haven't experienced this myself but a friend of mine who was playing on my COOP server was. There were 3 of us in the game and he was the only one to experience it.

Hey everyone, I'm selling a Dell PowerEdge SC430 on Ebay if anyone is interested. Dell PowerEdge SC430 Thanks!

At the bottom of this page is a nice little comparison chart between the cards. Be aware that the 7800GS is AGP and NOT PCI-E

Remix!!

Agreed. I just upgraded the PC with 512MB of RAM in my previous post and the combat sight works properly now.

The only time I've seen problems like this is when the user has less than 1GB of RAM, but I'm not so sure since you said he could connect with the previous patch...

Thats definately a 6500. Not sure why the description states 6600gt. Here is a page with benchmarks of the card. If your thinking about purchasing this card I would reccomend getting it here I would not reccomend this card for GRAW though...

Well this has got to be the funniest bug I've seen so far.... We were doing a coop game and we were on the Quarterback mission. We were at the part where you get into the APC. When entering it, one of my teammates dissapeared from my screen even though he said he was in the APC. When we exited the APC.. this happened Then we made our way to the extraction point and got into the helicopter. Again, I could not see him in the helicopter. As we took off I looked to the side and saw this... LOL!!!

I tried the omega 6.5's earlier with the monitor's inf file directly from the manufacturers website. Still no go.

Tried that as well.. I can click force to 1024x768, but it won't apply.(button is greyed out) When I try to do it via the windows display properties its not even an option... 800x600 is the only choice Again, when I switch back to 6.4 i can run 1024x768