EricJ Posted December 2, 2003 Share Posted December 2, 2003 (edited) swartsz, that is one OUTSTANTDING M4 you got there, I know some others are gonna re-think their modeling after seeing that one. The only thing I would point out is that the foregrip RIS is not usually higher than the RIS rail on top of the receiver, but they are usually even. It looks like your receiver could be raised some (instead of re-doing the foregrip RIS/handguard). I for all people should have caught that too, that's why the Aimpoint on the previous ones with the PAQ-4 looked lower.... Going blind in my old age.. But try GG&G as they have a good cantilever mount that's pretty much seen the world over. But once he raises the reciever, the Aimpoint will clear the PAQ-4 with no problem. Matter of fact, the previous one should also be done the same, though in practice the mount is right near the hanguard release system. Edited December 2, 2003 by EricJ Quote Link to comment Share on other sites More sharing options...
Whisper_44 Posted December 2, 2003 Share Posted December 2, 2003 (edited) But try GG&G as they have a good cantilever mount that's pretty much seen the world over. Good Call EricJ from a local company here in AZ Swartsz, if you need a good texture, I think I can help, just let me know? Edited December 2, 2003 by Whisper_44 Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 2, 2003 Author Share Posted December 2, 2003 thank you all for your help, will also try to make that scopemount for one of the models, but i will also use the mount like in the last picture, it is what Argyll requested! Swartsz, if you need a good texture, I think I can help, just let me know? that would be awesome, Whisper!!! i could definitly use one!!!! Quote Link to comment Share on other sites More sharing options...
Whisper_44 Posted December 2, 2003 Share Posted December 2, 2003 it is what Argyll requested! who....??? just kidding man CK is my boy. I'll find you on MSN when I get home. Throw you some images Quote Link to comment Share on other sites More sharing options...
Argyll Posted December 2, 2003 Share Posted December 2, 2003 (edited) Whisper the texture maybe from that box of goodies you sent me!!! I sent him a pic of the M4 with a sure fire and all the stuff!!! One with a cut down handle and green handguard!! Edited December 2, 2003 by Argyll Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 2, 2003 Author Share Posted December 2, 2003 to make it clear to everyone what we are talking about, this this the picture Argyll sent me. Quote Link to comment Share on other sites More sharing options...
Whisper_44 Posted December 2, 2003 Share Posted December 2, 2003 CK - I see you check that box of goodies regularly original is 2048x1536 I have some decent shots of that urban warrior setup I used it on my SR47 30% of original size Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 2, 2003 Author Share Posted December 2, 2003 great pics, Whisper! Quote Link to comment Share on other sites More sharing options...
Argyll Posted December 2, 2003 Share Posted December 2, 2003 do you have the original? The one I have from the box is 640 x 480!! I just love that M4 it's the dogs bollox!! Quote Link to comment Share on other sites More sharing options...
dagger Posted December 3, 2003 Share Posted December 3, 2003 Great pics whisper Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 3, 2003 Author Share Posted December 3, 2003 (edited) following the advice from Thumper1518 and EricJ i changed the models a bit so the rails look more aligned. have a look! Edited December 3, 2003 by swartsz Quote Link to comment Share on other sites More sharing options...
Whisper_44 Posted December 3, 2003 Share Posted December 3, 2003 (edited) that was it swartsz, excellent job. " did I send you the anpeq2 textures in that .zip? Edited December 3, 2003 by Whisper_44 Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 3, 2003 Author Share Posted December 3, 2003 yes you did! Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 3, 2003 Author Share Posted December 3, 2003 (edited) **edit**, just noticed, watching this picture, the bottom part of the scope-mount was on backwards. but no need to worry, already fixed it! Edited December 3, 2003 by swartsz Quote Link to comment Share on other sites More sharing options...
dagger Posted December 3, 2003 Share Posted December 3, 2003 Looking good man Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 4, 2003 Author Share Posted December 4, 2003 made a CQB version of the m4. Quote Link to comment Share on other sites More sharing options...
swifty Posted December 4, 2003 Share Posted December 4, 2003 sweeeeeeeeeeet.... no collapsed stock though? Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 4, 2003 Author Share Posted December 4, 2003 how does this look, Swifty? Quote Link to comment Share on other sites More sharing options...
Whisper_44 Posted December 4, 2003 Share Posted December 4, 2003 swartszy you read my mind with that one, but dealing with CK it's no surprise..you are the man hands down my favorite so far. I can think of a couple more variations I'd like to see, but I'm going to wait and see the direction that CK is headed. he's a guru and our affinity for the cqbr is well documented. his new sf chr's will never be the same once equipped with that bad boy. good call on the stock swifty Quote Link to comment Share on other sites More sharing options...
F'n New Guy Posted December 4, 2003 Share Posted December 4, 2003 OMG me like, me like Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 4, 2003 Author Share Posted December 4, 2003 thanks guys! I can think of a couple more variations I'd like to see like? i am always open to suggestions Quote Link to comment Share on other sites More sharing options...
Argyll Posted December 4, 2003 Share Posted December 4, 2003 superb!!!! Crane Stock,and that'll be the best Xmas present I'll get mate!! Quote Link to comment Share on other sites More sharing options...
swartsz Posted December 4, 2003 Author Share Posted December 4, 2003 working on it! Quote Link to comment Share on other sites More sharing options...
F'n New Guy Posted December 4, 2003 Share Posted December 4, 2003 pssssst, swartsz, i think u and argyll should get together and make a mod for the new year what cha think? Quote Link to comment Share on other sites More sharing options...
Argyll Posted December 4, 2003 Share Posted December 4, 2003 thats very funny CQB................it's called DYNACOMP!!!,out of little eggs the beast will be born!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.