WinRAR - Updated Version 4.00

[Pave Low]

Personally, I use the great (& free) 7-Zip application for .rar files

but for anyone who has a paid version or wants to try a 40 day trial version,

an updated new "Faster" version of WinRAR has been released

WinRAR - What's new in the latest version

Version 4.00

1. RAR decompression speed is improved. Depending on data type,

decompression can be up to 30% faster than in previous versions.

Both the general RAR algorithm and most of special RAR multimedia

methods benefit from this improvement. The only module of RAR

algorithm, which is not affected, is "Text compression" method.

2. Changes in ISO support:

a) UDF support is upgraded to UDF 2.50 revision. It makes possible

to unpack most of Blu-ray ISO files;

b) when browsing UDF ISO file, UDF revision number is displayed

after the "UDF" format name in WinRAR address bar

and in archive information dialog;

c) WinRAR sets the folder modification date when unpacking folders

stored in UDF and ISO9660 files.

3. Changes in password dialog:

a) WinRAR uses the same format of password dialog both when archiving

and extracting, so "Show password" option is available also

when extracting;

b) "Organize passwords..." button in password dialog provides

access to password organizer interface, where you can specify

your frequently used passwords. You will be able to access these

saved passwords using the drop down list or autocomplete feature

in password dialog.

It is important to know that saved passwords are not encrypted

and anybody having access to your computer can view them.

Use "Organize passwords" feature only if your computer is

protected from unauthorized access;

c) "Use for all archives" option is available in password dialog

when unpacking several archives at once. You can utilize it

to apply an entered password to all archives.

If you use this option with an empty password, WinRAR will skip

all encrypted archives;

d) Unlike previous versions, the password from default compression

profile is not used for extraction.

If you wish to use the same password for all extracting archives,

press "Organize passwords..." button in the password dialog

and define a new password entry, specifying "*" file mask

in "Select for archives" field.

4. In Windows 7 WinRAR will display the total operation progress

also on WinRAR icon on Windows taskbar. You can disable it using

"Taskbar progress bar" option on "General" page of WinRAR settings.

5. Numerous Unicode support improvements allow to process non-English

file names more smoothly. These improvements include:

a) better Unicode handling in WinRAR in "Rename", "Convert",

"Find" and other commands, in folder tree panel, in password

request dialog and in many other parts of WinRAR interface;

b) correctly displayed Unicode names in WinRAR items in Explorer

context menus;

c) Unicode support in .lng files, making WinRAR localization

possible for Unicode only languages.

6. Changes in -x switch syntax. Now you can specify a wildcard

exclusion mask for folders. Such mask must have the trailing '\'

character, like -x*tmp*\ or -x*\temp\

7. New "Extract relative paths" option in "Advanced" part of extraction

dialog. If you browse some archive subfolder in WinRAR shell

and enable "Extract relative paths" option, the path part up to

and including the current subfolder will be removed from extracted

file paths.

For example, if you are inside of "Backup\MyData" archive folder

and extract "Images" folder, it will be extracted as "Images",

not as "Backup\MyData\Images".

This option is the new default extraction mode, but you can change

the default back to WinRAR 3.x style. Just select "Extract full paths"

and then press "Save settings" in "General" part of extraction dialog.

8. Windows 98, Windows Me and Windows NT are not supported by WinRAR

and WinRAR self-extracting modules anymore. Minimum Windows version

required for WinRAR 4.0 is Windows 2000.

If you need to run WinRAR on older Windows, you can download

previous WinRAR versions from ftp://ftp.rarlab.com/rar

9. If TAR, TAR.GZ or TAR.BZ2 archive contains symbolic or hard links

and if destination file system is NTFS, WinRAR will create these

links when unpacking such archive. WinRAR will create symbolic links

as symbolic and hard links as hard in Windows Vista and newer

and it will create all links as hard in older Windows.

If destination file system is FAT32 or any other not supporting

file links, WinRAR will skip links when unpacking TAR, TAR.GZ

and TAR.BZ2 archives.

10. Recovery volume processing involves less disk seek operations

resulting in higher performance.

11. You can select Windows 7 library in tree panel in extraction dialog

and WinRAR will use its default save location as the destination path.

12. "Report" command allows to select HTML, Unicode text and usual text

as output format for report file. Unlike previous WinRAR versions,

now WinRAR preservers Unicode characters in reports when using HTML

or Unicode text format. So non-English characters in file names

will be displayed properly in such reports.

13. Message list in GUI SFX archives displays only operation status

and error messages. It does not contain names of all extracted files

anymore. This change improves the speed and reduces memory requirements

for SFX archives containing a large number of files. Also it makes

easier to locate error messages, because they are not hidden among

extracted file names.

14. GUI SFX archives display "Extract" button instead of "Install"

if no "Setup" or "Presetup" commands are present in the archive

comment. If you prefer "Install" button, but do not need to

execute any setup programs, you can add "Setup=<>" command.

15. WinRAR displays the current percent above the operation progress bar

when repairing an archive containing the recovery record

and when processing recovery volumes.

16. WinRAR limits the maximum possible volume size to 4 GB minus 1 byte

when creating RAR volumes on a disk with FAT or FAT32 file system

in volume size autodetecting mode. These file systems do not support

4 GB and larger files.

17. If "Wait if other WinRAR copies are active" option is enabled

and WinRAR waits for another copy, you can press "Continue" button

in command progress window to force WinRAR to stop waiting.

So now "Continue" button allows to override the state of

"Wait if other WinRAR copies are active" option for current operation.

18. WinRAR displays one password request instead of two, when saving

an encrypted file back to RAR or ZIP archive after modifying it

in some external editor. Previous WinRAR versions usually requested

the password twice, both when extracting the original file

and archiving its modified copy. Only RAR archives with encrypted

file names were processed with the single password prompt.

19. New error code 10 ("no files") is added to list of error codes

returned in command line mode by RAR and WinRAR. This new code

can be returned by archive, extract, delete and repair commands.

It means that RAR did not find any files matched the specified

file or archive mask.

20. File name area in file overwrite dialog occupies several lines now.

It makes possible to display much longer names.

21. Now switch -ep3 converts not only disk letters, but also UNC paths.

So \\server\share will be converted to __server\share when archiving

and restored to the original \\server\share when extracting with -ep3.

22. New "Background extraction" option in "Advanced" part of extraction

dialog places WinRAR into background, when extracting files.

You can save its default state with "Save settings" button in "General"

part of extraction dialog, just like for other extraction options.

"Background archiving" option from the default compression profile

does not affect the extraction behavior anymore.

23. "Mode..." button in operation progress window is enabled also

when extracting or testing archives. It provides access to

"Command parameters" dialog, where you can set "Turn PC off when done"

option for extraction and test operations.

Previously this dialog was accessible only when archiving.

24. Bugs fixed:

a) renaming a file in archive could also rename all other files

with the same name in other folders of the same archive;

b) previous versions displayed the wrong total packed size

in "Info" command for multivolume CAB archives;

c) in ZIP archives 'U' (update) and 'F' (fresh) commands could

erroneously update even files not specified in the command line.

It happened only for files in current folder which names matched

files in ZIP archive. This bug was not present in usual 'A' (add)

archiving mode.