Cpl Ledanek Posted April 27, 2010 Share Posted April 27, 2010 Yes, they are cheap...was a gift. please suggest a fix/mod if done before. tried duct tape but too bulky...was going to use Gorilla Glue and sand it down, but looking for more creative ideas. Quote Link to comment Share on other sites More sharing options...
NightCrawler Posted April 28, 2010 Share Posted April 28, 2010 Locktite 411 is worth a try, if you can find it. We use it at work and it's the best of the super glues that I've used. Quote Link to comment Share on other sites More sharing options...
SnowFella Posted April 29, 2010 Share Posted April 29, 2010 I'd likely just break out the drill and some smallish bolts/nuts. 2 holes in the metal bit aswell as 2 in the plastic, reinforce the outside of the plastic with some washers so the bolts don't get pulled through from stress. Quote Link to comment Share on other sites More sharing options...
Cpl Ledanek Posted April 29, 2010 Author Share Posted April 29, 2010 I'm starting to think just cut on side and hook a mic on the broke side.... I started taping one side with some hospital gauze to give some cushion...Bose Support was asking too many questions, next thing they gonna ask is ship it to them.... I'll look for that Locktite 411....I think the head band at the apex is too tight to begin with....we'll see Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.