tailer76 Posted May 9, 2008 Share Posted May 9, 2008 well this is my new skin for the fantastic brettzies mod..the new acu ranger..i hope do you like .... http://img242.imageshack.us/img242/5763/acurangergq8.jpg Quote Link to comment Share on other sites More sharing options...
Brettzies Posted May 9, 2008 Share Posted May 9, 2008 That looks great! Gloves might be a little bright, but overall very cool. Quote Link to comment Share on other sites More sharing options...
Commander Outcast Posted May 9, 2008 Share Posted May 9, 2008 Skin's really nice, but the patterns a little big. I could send you a better swatch if you like. Quote Link to comment Share on other sites More sharing options...
tailer76 Posted May 9, 2008 Author Share Posted May 9, 2008 Skin's really nice, but the patterns a little big. I could send you a better swatch if you like. sure..no problem...and the bright of the gloves..i tnink..is for dinamyc lights because in the normal mission looks diferent http://img294.imageshack.us/img294/4681/dibujoar8.jpg Quote Link to comment Share on other sites More sharing options...
DerRelient Posted May 10, 2008 Share Posted May 10, 2008 Looks nice, but a few things: Make ACU pixels smaller and sharpen them. Turn down the alpha on the exposed carbon-fiber Make 'Ranger" tab smaller Replace Ghost patch with an actual unit insignia Make vests/webbing Ranger Green of ACU Quote Link to comment Share on other sites More sharing options...
bugkill Posted May 11, 2008 Share Posted May 11, 2008 (edited) The skin looks great, but I would recommend losing the Ranger tab or putting it in the right spot (which is on the left side above the ghost unit patch). The tab needs to be much smaller and I would also include the Special Forces tab given they are a SF unit. If you need some proper ACU tabs, just shoot me a PM with your email. tailer76, Sent you a PM. Edited May 11, 2008 by bugkill Quote Link to comment Share on other sites More sharing options...
Brettzies Posted May 11, 2008 Share Posted May 11, 2008 (edited) The skin looks great, but I would recommend losing the Ranger tab or putting it in the right spot (which is on the left side above the ghost unit patch). These models have mirrored UVs, so you'll get patches on both sides unfortunatley. Same with the marine and the flag pointing the wrong way. Edited May 11, 2008 by Brettzies Quote Link to comment Share on other sites More sharing options...
tailer76 Posted May 11, 2008 Author Share Posted May 11, 2008 as brettzies says is not possible to put in both sides ,it just can watch it in a good way in one side..look http://img261.imageshack.us/img261/6246/ranger1wz0.jpg with the tab,no problem i can put it smaller and i'm adding the special forces tab...but only looking good in the right shoulder like in my first screemshot Quote Link to comment Share on other sites More sharing options...
Commander Outcast Posted May 11, 2008 Share Posted May 11, 2008 If I was skinning it I'd just blow of the patches all together. I'm sure a SF team that elite wouldn't wear patches, or identification at all. Delta force and the SEAL teams don't, as far as I know. Quote Link to comment Share on other sites More sharing options...
MrNothing Posted May 11, 2008 Share Posted May 11, 2008 this looks nice xD i think you should do a plain olive green BDU so it could some what replicate the DEVGRU (seal team 6) Quote Link to comment Share on other sites More sharing options...
bugkill Posted May 12, 2008 Share Posted May 12, 2008 (edited) If I was skinning it I'd just blow of the patches all together. I'm sure a SF team that elite wouldn't wear patches, or identification at all. Delta force and the SEAL teams don't, as far as I know. I think he is bypassing realism in order to make some skins that feature some form of unit identification. I see where he is coming from. Well, if they show up on both sides, I would recommend no unit patches and have velcro instead. Make the units sterile (which means no patches), which could lend credence to their covert status. Edited May 12, 2008 by bugkill Quote Link to comment Share on other sites More sharing options...
Tri_Tard Posted May 18, 2008 Share Posted May 18, 2008 i havent made any skins for graw but here is what i would recommend you doing... -->make acu camo pat a bit smaller, bump up the res of it as well. -->also, if you want to add a "word" logo i suggest putting it on the back of helmets or on the vest. (front or rear) -->change the vest color. maybe make it acu, or a light tan/green color -->when adding a logo to a mirrored uv, find one that is symmetrical on both sides. if it has words, either remove them, or make the words in the logo unreadable Quote Link to comment Share on other sites More sharing options...
Mig1 Posted June 6, 2008 Share Posted June 6, 2008 Sweet screenshot. I'd concur with the other posts. This would be the cat's behind with the TC-2001 helmets changed to OD or tan and the body armor in coyote brown or ranger green. Or ACU for that matter. Got a download link? Quote Link to comment Share on other sites More sharing options...
Ruin Posted June 6, 2008 Share Posted June 6, 2008 Looks nice. I'd echo a lot of the advice given here already (ACU size, proper tab size, etc.) I'd also reccommend making the pockets on the sleeves look right with the Velcro. I know it varies from unit to unit, but we're not allowed to mask the velcro on the pockets with an ACU pattern, so I'd fix that. As far as the patches, cool to see unit patches. Don't worry about it being on both sides, as long as it's right on the left, it's right on the right. They're just combat patches/tabs. Do make sure the text reads the right way though, hehe. I also agree, go with BDU LBEs. Good work. Quote Link to comment Share on other sites More sharing options...
pz3 Posted June 22, 2008 Share Posted June 22, 2008 (edited) -Lose the tabs and patches... -add the velcro on the sleeves -make the acu look more worn or faded... not blurred really but the colors wont contrast as much. -some dirt on the knees elbows.... -shrink the pattern a bit. -Lose the black... replace with tan or acu patterns. boots helmets go with tan. -Oakleys ive heard of the plastic melting on them causing some bad injuries during combat... not sure if that matters but I sure as heck wouldn't wear them now because of that. and your pretty much spot on ... looks good BTW and why the #(%& is he flagging his buddy! Edited June 22, 2008 by pz3 Quote Link to comment Share on other sites More sharing options...
MrNothing Posted August 6, 2008 Share Posted August 6, 2008 hey is there any chance this will be released ? i would love to use it =D Quote Link to comment Share on other sites More sharing options...
Temple Posted April 1, 2012 Share Posted April 1, 2012 (edited) What happened to this? The skins look awesome,i cant find them anywhere for download. And this is probably the only one where a character has rolled up sleeves...(i need that) Edited April 1, 2012 by Temple Quote Link to comment Share on other sites More sharing options...
Blame Posted April 5, 2012 Share Posted April 5, 2012 Just download the Brettzies weapon mod 3.02, it comes with 3rd person and those character skins. Quote Link to comment Share on other sites More sharing options...
nickru58 Posted March 12, 2013 Share Posted March 12, 2013 how can i get this skin its really cool Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.