GothicSnake Posted January 7, 2007 Share Posted January 7, 2007 First mission is a royal pain in the ass. The Marines you're with are useless and do nothing but run off and alert all the bad guys, and after having my ass thoroughly handed to me I made it out with 3 out of 6 men only to be wasted by a guy on a technical turret who I shot at least 100 times and didn't move until I was right on him. The first part is just GR's ######ty allied AI, but the second seems like some kind of bug with the last objective. I've never had that happen before and lets just say I was more than a little miffed about it. Quote Link to comment Share on other sites More sharing options...
locobob Posted January 7, 2007 Share Posted January 7, 2007 hello everyone i am having the same issue that Locobob had. i have downloaded the mod and unzipped it into my mod foled, it shows the centcom folder and looks like everything is there but it is not showing up as an available mod when i go to activate it in the game. should there be an install wizard after i unzip the files i dont get that either. thanks for any ideas or comments cant wait to try this mod sounds awesome. thank you. Figured out my problem: I unzipped and ended up with Centcom_Mod in my mod folder, if you open it you'll find a single folder with the name Centcom Mod (note the line is gone between Centcom and Mod). This is the folder that must be in the mods folder, otherwise it won't show. Maybe you did the same thing. Quote Link to comment Share on other sites More sharing options...
lesterribles Posted January 8, 2007 Share Posted January 8, 2007 Figured it out...swear I had tried that at least 3 times without success! My ctd were at 9:03 and at 9:23 on quick mission #2... Quote Link to comment Share on other sites More sharing options...
migryder Posted January 8, 2007 Share Posted January 8, 2007 can you explain what you were doing when it ctd on quick mission #2? Do you have an Ike log for one of those? mig Quote Link to comment Share on other sites More sharing options...
callmehobbes Posted January 8, 2007 Share Posted January 8, 2007 The hostage rescue mission is fantastic, one of the best I've ever played. When the message appeared on the screen saying the hostage is about to be executed I the tension levels rise up to unbearable. Great stuff! Quote Link to comment Share on other sites More sharing options...
thales100 Posted January 8, 2007 Share Posted January 8, 2007 10/10, certainly one of the all time best mods. Congratulations to Jay316 and all crew. Quote Link to comment Share on other sites More sharing options...
CommandoCrazy Posted January 9, 2007 Share Posted January 9, 2007 Damn how could I miss the release!!! Thank God I got DSL now Can't wait to try it! CC Quote Link to comment Share on other sites More sharing options...
simulacra Posted January 9, 2007 Share Posted January 9, 2007 I cant start mission 1 at all, after loadout the loading behins and then I'm thron out into windows, tried miss 2, it loaded but some objects like stones were untextured. Quote Link to comment Share on other sites More sharing options...
Foxtrot360 Posted January 9, 2007 Share Posted January 9, 2007 Okay the MOD (Mac Version) is great, but I just have one problem. I completed Mission 1, then I'm at mission accomplished screen with # of kills, medals earned, and the like. But when I clicked continue my Mac just blanks and CTD. I was searching the thread and saw a file called Mission 1 Fix. Is this the one I need to download to fix the CTD? Sorry to annoy folks here. But thanx anyway guys I had that problem, but in Windows XP, but if you relaunch GR and go to campaign, youll see the 2nd mission is unlocked despite the crash. I havent had a crash since that mission. PS - Nice sig simulacra Quote Link to comment Share on other sites More sharing options...
Kurtz Posted January 9, 2007 Share Posted January 9, 2007 What an outstanding mod, great fun. The maps and weapons are fantastic. I am on the prison mission. An incredible amount of work in this mod, kudos all around. This is why I still play GR! Quote Link to comment Share on other sites More sharing options...
El_Davido Posted January 9, 2007 Share Posted January 9, 2007 Okay the MOD (Mac Version) is great, but I just have one problem. I completed Mission 1, then I'm at mission accomplished screen with # of kills, medals earned, and the like. But when I clicked continue my Mac just blanks and CTD. I was searching the thread and saw a file called Mission 1 Fix. Is this the one I need to download to fix the CTD? Sorry to annoy folks here. But thanx anyway guys I had that problem, but in Windows XP, but if you relaunch GR and go to campaign, youll see the 2nd mission is unlocked despite the crash. I havent had a crash since that mission. PS - Nice sig simulacra I had that same problem, I had a snoop around and I couldnt find the cause. Quote Link to comment Share on other sites More sharing options...
lesterribles Posted January 9, 2007 Share Posted January 9, 2007 can you explain what you were doing when it ctd on quick mission #2? Do you have an Ike log for one of those? mig Just loading a quicksave. Right now, in Mission 4 all mission objectives "completed"...no mission end. Quote Link to comment Share on other sites More sharing options...
migryder Posted January 10, 2007 Share Posted January 10, 2007 I just tested #2 for quick mission mode and was able to load a quick save from in game, going back to main menu then to load save game , and quiting the game and reloading to eventually load the saved game...several times each...I'm at a loss unless it has to do with campaign mode...sorry 'bout your problem... mig Quote Link to comment Share on other sites More sharing options...
El_Davido Posted January 10, 2007 Share Posted January 10, 2007 can you explain what you were doing when it ctd on quick mission #2? Do you have an Ike log for one of those? mig Just loading a quicksave. Right now, in Mission 4 all mission objectives "completed"...no mission end. You need to go to point Delta, its marked on the command map inside the compound and then the mission ends. Yeah there should be a message saying, the only way I knew was that Id played it with Jay in coop testing. Quote Link to comment Share on other sites More sharing options...
Loki79 Posted January 10, 2007 Share Posted January 10, 2007 (edited) can you explain what you were doing when it ctd on quick mission #2? Do you have an Ike log for one of those? mig Just loading a quicksave. Right now, in Mission 4 all mission objectives "completed"...no mission end. i have the same Prob. Does anybody have an idea? I play the campaign (mission 4) Edited January 10, 2007 by Loki79 Quote Link to comment Share on other sites More sharing options...
El_Davido Posted January 10, 2007 Share Posted January 10, 2007 You need to go to point Delta, its marked on the command map inside the compound and then the mission ends. Yeah there should be a message saying, the only way I knew was that Id played it with Jay in coop testing. Quote Link to comment Share on other sites More sharing options...
Loki79 Posted January 10, 2007 Share Posted January 10, 2007 (edited) You need to go to point Delta, its marked on the command map inside the compound and then the mission ends. Yeah there should be a message saying, the only way I knew was that Id played it with Jay in coop testing. Oh sorry. I thought U talked about mission 2. THX Edit: sorry again, it doesn´t work. Which location is point delta? The one in the camp oder the one where U first met the informant? Both tested....nothing happend! Edited January 10, 2007 by Loki79 Quote Link to comment Share on other sites More sharing options...
natsanwa Posted January 10, 2007 Share Posted January 10, 2007 hey. get the cia dude, take him to the point (insertion zone) where you started, then take all your team back to the point inside the prison. hey presto - mission complete. Quote Link to comment Share on other sites More sharing options...
Foxtrot360 Posted January 10, 2007 Share Posted January 10, 2007 I couldnt get the mission to end after killing everyone, so i just cheated and unlockhero/autowin the mission. Quote Link to comment Share on other sites More sharing options...
Loki79 Posted January 10, 2007 Share Posted January 10, 2007 Ok, thank´s. Tried it 6 times and then it runs. But new Prob in Mission 6. Arrived with Taliban Leader and Team after completing all jobs at the E-Zone and ....right, nothing happens! Quote Link to comment Share on other sites More sharing options...
Loki79 Posted January 11, 2007 Share Posted January 11, 2007 I couldnt get the mission to end after killing everyone, so i just cheated and unlockhero/autowin the mission. how did You do that? Quote Link to comment Share on other sites More sharing options...
Zoog Posted January 11, 2007 Share Posted January 11, 2007 First off, thanks for this modification! Unfortunately I have a technical problem in the first mission (i played the patched mission 1 version). After I'm finished with the mission i get to the mission debriefing screen (with hit % etc). When i click the next button to continue, my game just crashes to the desktop. I'm playing on an Acer Laptop with the following specs: AMD64 3000+ 512mb Ram Ati Radeon Mobility 9600 - 64MB WinXP SP2 - completely up to date Quote Link to comment Share on other sites More sharing options...
El_Davido Posted January 11, 2007 Share Posted January 11, 2007 Ive had similar problems, if you re load centcom and go back into your campaign can you select mission 2? Quote Link to comment Share on other sites More sharing options...
CommandoCrazy Posted January 11, 2007 Share Posted January 11, 2007 All I can say is a big thank you to the CENTCOM team. I almost cried when I saw those skins and compared them to my own ones. This mod is all I ever wanted for GR. CC Quote Link to comment Share on other sites More sharing options...
jay316 Posted January 11, 2007 Author Share Posted January 11, 2007 if the support keeps up there may be more........ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.