Jump to content

HELP! for win2000 server


ilovemecha

Recommended Posts

hello i have a win 2000 server and cant get the sads to start i have a good config and set up that works on my win2003 server

its just ward the server should at leas start even if it could not run it but it seams like its not even trying ::sad face::

any help would be appreciated

server specs are dual xeon 2.8 with a gig ram 100mb back bone connect

Link to comment
Share on other sites

Mecha, I replied to your post on the ubi forums. I'm not sure why it's not working. There is another person running win2000 server and is having trouble as well. I'm wondering what the common denominator is - perhaps it's win2000.

I attempted to run a dedicated server on my win2000 workstation and couldn't get it to load properly. which is at least on step better than you. The server console would start and indicate it was loading a configuration but didn't list it. Normally it tells what config is being loaded.

Do this for us. List the contents of your servers_shared.xml and the graw_server_YOURCONFIGNAM.xml files so we can look at them.

Secondly give us the hardware specs of the server and lastly, watch what happens and give us a very detailed behavior of what happens when you try to start. Like, Click on GRAW-standalone.exe, black window opens. Says loading and then crashes immediately. Or something like that. I'm just trying to get as much info to work with.

Link to comment
Share on other sites

right as i said the win 2000 server i have is a dual xeon 2.8 with a gig ram and 100mb pipe connect

when i try to start the sads it shows that its getting the input from me by showing a hour glass for a very brief time like lest than 1/2 a sec then does noting no dos looking console comes up no cpu usage saying that its working no exe showing up on the processes .... nothing

i don't see why the config would matter cuz it runs on a 2003 server i have but the config is some thing like this but i have chaged the admin password to nothing for the public

"file graw_server_coop.xml"

<?xml version="1.0" encoding="UTF-8"?>

<ghost_recon_3_server name="coop">

<allow_sidechange_under_match value="true"/>

<auto_balance value="true"/>

<auto_balance_limit value="2"/>

<auto_kick value="false"/>

<auto_kick_time value="240"/>

<both_side_ready_required value="true"/>

<coop_difficulty value="hard"/>

<death_cam value="1"/>

<dedicated_server value="true"/>

<disable_frag_grenade value="false"/>

<disable_grenade_launcher value="false"/>

<disable_heavy_rifle value="false"/>

<disable_light_rifle value="false"/>

<disable_smoke_grenade value="false"/>

<disable_sniper value="false"/>

<fail_on_leader_death value="false"/>

<forced_spawn_time value="60"/>

<friendly_fire value="true"/>

<game_mode value="MPCoop"/>

<immortality_duration value="3"/>

<level value="mission05_ogr"/>

<load_next_maps value="true"/>

<map_cycle value=""/>

<match_length value="10"/>

<match_points value="200"/>

<max_ai_ghosts value="3"/>

<max_deaths value="5"/>

<max_move_without_ack_time value="2"/>

<max_players value="12"/>

<member_info_broadcast_interval value="5"/>

<message_of_the_day value=""/>

<mpcoop_timer value="5"/>

<name value="SADS @jesusservers.com"/>

<next_map value=""/>

<next_round_time value="15"/>

<no_cost_weapons value="false"/>

<password value=""/>

<password_locked value="false"/>

<players_ready_required value="2"/>

<port value="15250"/>

<punish_tk value="false"/>

<resupply_ammo_time value="20"/>

<rounds value="1"/>

<scan_for_cheats value="true"/>

<siege_time value="5"/>

<skip_insertion value="false"/>

<spawn_time value="10"/>

<start_condition value="2"/>

<start_points value="50"/>

<switch_sides value="false"/>

<teamkill_kick_limit value="3"/>

<vote_enabled value="true"/>

<vote_kick_starters value="1"/>

<vote_map_starters value="1"/>

<vote_ratio value="70"/>

<vote_time value="10"/>

<win_condition value="6"/>

</ghost_recon_3_server>

"file servers_shared.xml"

<?xml version="1.0" encoding="UTF-8"?>

<ghost_recon_3_servers_shared>

<admin_password value="" />

<!--

The path to your wanted server settings xml. for example:

<standalone_path value="/settings/servers/graw_server_myserver.xml" />

-->

<standalone_path value="Settings\servers\graw_server_coop.xml" />

<!--

Your network speed, in kbps. Lowest recomended is 256, highest for internet play is 3048.

Setting this value to 0 means LAN play.

-->

<standalone_network_speed value="1048" />

<standalone_post_on_gamespy value="true" />

</ghost_recon_3_servers_shared>

there aare my configs i have also tried letting it run the default config and still the same thing happens (no sads window shows up or starts just a quick hour glass )

thanks

Link to comment
Share on other sites

right as i said the win 2000 server i have is a dual xeon 2.8 with a gig ram and 100mb pipe connect

when i try to start the sads it shows that its getting the input from me by showing a hour glass for a very brief time like lest than 1/2 a sec then does noting no dos looking console comes up no cpu usage saying that its working no exe showing up on the processes .... nothing

i don't see why the config would matter cuz it runs on a 2003 server i have but the config is some thing like this but i have chaged the admin password to nothing for the public

"file graw_server_coop.xml"

<?xml version="1.0" encoding="UTF-8"?>

<ghost_recon_3_server name="coop">

<allow_sidechange_under_match value="true"/>

<auto_balance value="true"/>

<auto_balance_limit value="2"/>

<auto_kick value="false"/>

<auto_kick_time value="240"/>

<both_side_ready_required value="true"/>

<coop_difficulty value="hard"/>

<death_cam value="1"/>

<dedicated_server value="true"/>

<disable_frag_grenade value="false"/>

<disable_grenade_launcher value="false"/>

<disable_heavy_rifle value="false"/>

<disable_light_rifle value="false"/>

<disable_smoke_grenade value="false"/>

<disable_sniper value="false"/>

<fail_on_leader_death value="false"/>

<forced_spawn_time value="60"/>

<friendly_fire value="true"/>

<game_mode value="MPCoop"/>

<immortality_duration value="3"/>

<level value="mission05_ogr"/>

<load_next_maps value="true"/>

<map_cycle value=""/>

<match_length value="10"/>

<match_points value="200"/>

<max_ai_ghosts value="3"/>

<max_deaths value="5"/>

<max_move_without_ack_time value="2"/>

<max_players value="12"/>

<member_info_broadcast_interval value="5"/>

<message_of_the_day value=""/>

<mpcoop_timer value="5"/>

<name value="SADS @jesusservers.com"/>

<next_map value=""/>

<next_round_time value="15"/>

<no_cost_weapons value="false"/>

<password value=""/>

<password_locked value="false"/>

<players_ready_required value="2"/>

<port value="15250"/>

<punish_tk value="false"/>

<resupply_ammo_time value="20"/>

<rounds value="1"/>

<scan_for_cheats value="true"/>

<siege_time value="5"/>

<skip_insertion value="false"/>

<spawn_time value="10"/>

<start_condition value="2"/>

<start_points value="50"/>

<switch_sides value="false"/>

<teamkill_kick_limit value="3"/>

<vote_enabled value="true"/>

<vote_kick_starters value="1"/>

<vote_map_starters value="1"/>

<vote_ratio value="70"/>

<vote_time value="10"/>

<win_condition value="6"/>

</ghost_recon_3_server>

"file servers_shared.xml"

<?xml version="1.0" encoding="UTF-8"?>

<ghost_recon_3_servers_shared>

<admin_password value="" />

<!--

The path to your wanted server settings xml. for example:

<standalone_path value="/settings/servers/graw_server_myserver.xml" />

-->

<standalone_path value="Settings\servers\graw_server_coop.xml" />

<!--

Your network speed, in kbps. Lowest recomended is 256, highest for internet play is 3048.

Setting this value to 0 means LAN play.

-->

<standalone_network_speed value="1048" />

<standalone_post_on_gamespy value="true" />

</ghost_recon_3_servers_shared>

there aare my configs i have also tried letting it run the default config and still the same thing happens (no sads window shows up or starts just a quick hour glass )

thanks

Aren't these slashes...

<standalone_path value="Settings\servers\graw_server_coop.xml" />

backwards?

Here is what ours looks like

<standalone_path value="settings/servers/graw_server_afz public.xml" />

You are opening the GRAW-standalone.exe aren't you?

Edited by ROCOAFZ
Link to comment
Share on other sites

I was incorrect in my earlier assessment of Win2000 W/S not running the SADS. It does run and I am able to join the server - it just doesn't llist the config file in the server console screen. Which is odd. So it most likely should run on Win2000 server.

I'm in agreement with Roco, the pathing used in the shared_servers.xml may be the culprit. The pathing convention they are using is not standard windows/dos which uses backslashes between directories. In the XML file it should be using forward slashes. This might be causing the server to not locate the config and then crash out.

Also - check this line in the config file:

<no_cost_weapons value="false"/> - this indicates that you want to have tac points used for purchasing weapons which i'm not sure is a setting for [GR] COOP. Try setting it to true.

I would attempt that first and get back to us. If that doesn't work, I'll setup a Win2000 server to test and see if I can reproduce your problem.

Edited by FI_FlimFlam
Link to comment
Share on other sites

I was incorrect in my earlier assessment of Win2000 W/S not running the SADS. It does run and I am able to join the server - it just doesn't llist the config file in the server console screen. Which is odd. So it most likely should run on Win2000 server.

I'm in agreement with Roco, the pathing used in the shared_servers.xml may be the culprit. The pathing convention they are using is not standard windows/dos which uses backslashes between directories. In the XML file it should be using forward slashes. This might be causing the server to not locate the config and then crash out.

Also - check this line in the config file:

<no_cost_weapons value="false"/> - this indicates that you want to have tac points used for purchasing weapons which i'm not sure is a setting for [GR] COOP. Try setting it to true.

I would attempt that first and get back to us. If that doesn't work, I'll setup a Win2000 server to test and see if I can reproduce your problem.

Take your server.xml and copy it to your local machine. See if it runs. Then you know if it's a win2k problem or not. Or, set one up on your local pc and upload the xml without tweaking it. Test it.

Good call on the no cost... not sure if OGZR mode checks this but if it does like it used to with side switching, it could be a culprit.

Link to comment
Share on other sites

yeah sorry about the slashes going the wrong way i was testing that but i have set them back

i would like to reiterate that my settings work with my 2003 server but do not with my 2000 server

so the line is back to looking like this <standalone_path value="/Settings/servers/graw_server_coop.xml" />

as for not runing on any thing but win XP i am not shur thats the case as like many have side that it does run with win2003 server and in this thread alon some has run a SADS on win2000 server

its just odd that i dont get any responce i dont get a cmd window or any cpu usage

Link to comment
Share on other sites

well upon further review on my win2000 workstation rig, it actually wasn't loading any config at all. It was defaulting to a domination gametype. I know that I did have the path and config files correct. I'm wondering if there isn't a problem with win2000 specifically.

I'll attempt to load 2000 server in the next couple of days to test and get back to you if I can get it to work or not.

Link to comment
Share on other sites

On the server I'm refering to there is [GR], jo, cod, bf2, cc, il2, f4:af, and some other games I can't remember.

Graw is the only one that won't run dedi. Prolly some .dll that wn2k dosn't like.

No real point to this reply... just trying to keep this thread alive. Maybe someone who knows might notice.

Slow

Link to comment
Share on other sites

Has anyone managed to get the SADS going on Win2000? I am having the same problems noted by most others....

Click on the SADS icon and the dos box opens,displays loading for a few seconds ,and then promptly closes.

Files were uploaded to the server and configured using the "FlimFlam" instructions.

Windows 2000 Advanced Server (SP4) + all the millions of hotfixes

Abit MB with P4 EE 3.4 Ghz (Gallatin)

1 gig of memory

no mouse or monitor connected

This is servers shared xml

<?xml versionfiltered="1.0" encoding="UTF-8"?>

<ghost_recon_3_servers_shared>

<admin_password value="p/w here" />

<!--

The path to your wanted server settings xml. for example:

<standalone_path value="/settings/servers/graw_server_myserver.xml" />

-->

<standalone_path value="/settings/servers/graw_server_tdm.xml" />

<!--

Your network speed, in kbps. Lowest recomended is 256, highest for internet play is 3048.

Setting this value to 0 means LAN play.

-->

<standalone_network_speed value="2048" />

<standalone_post_on_gamespy value="true" />

</ghost_recon_3_servers_shared>

This is /settings/servers/graw_server_tdm.xml

<?xml versionfiltered="1.0" encoding="UTF-8" ?>

- <ghost_recon_3_server name="TDM">

<allow_sidechange_under_match value="true" />

<auto_balance value="true" />

<auto_balance_limit value="2" />

<auto_kick value="false" />

<auto_kick_time value="240" />

<both_side_ready_required value="true" />

<coop_difficulty value="normal" />

<death_cam value="1" />

<dedicated_server value="true" />

<disable_frag_grenade value="false" />

<disable_grenade_launcher value="false" />

<disable_heavy_rifle value="false" />

<disable_light_rifle value="false" />

<disable_smoke_grenade value="false" />

<disable_sniper value="false" />

<fail_on_leader_death value="false" />

<forced_spawn_time value="60" />

<friendly_fire value="true" />

<game_mode value="TeamDeathmatch" />

<immortality_duration value="3" />

<level value="tdm01" />

<load_next_maps value="true" />

<map_cycle value="" />

<match_length value="10" />

<match_points value="200" />

<max_ai_ghosts value="3" />

<max_deaths value="2" />

<max_move_without_ack_time value="2" />

<max_players value="24" />

<member_info_broadcast_interval value="5" />

<message_of_the_day value="" />

<mpcoop_timer value="5" />

<name value="TeamIRA" />

<next_map value="" />

<next_round_time value="15" />

<no_cost_weapons value="true" />

<password value="" />

<password_locked value="false" />

<players_ready_required value="2" />

<port value="15250" />

<punish_tk value="false" />

<resupply_ammo_time value="20" />

<rounds value="2" />

<scan_for_cheats value="false" />

<siege_time value="5" />

<skip_insertion value="false" />

<spawn_time value="10" />

<start_condition value="2" />

<start_points value="50" />

<switch_sides value="false" />

<teamkill_kick_limit value="3" />

<vote_enabled value="true" />

<vote_kick_starters value="1" />

<vote_map_starters value="1" />

<vote_ratio value="70" />

<vote_time value="10" />

<win_condition value="1" />

</ghost_recon_3_server>

I have had previous programs designed to run on XP that could be launched and run from this OS with an appropriate "windows component" upgrade. However dos is uninformative as to the reason for the failure to launch.

Edited by Stealth-IRA
Link to comment
Share on other sites

I'm back from vacation now and I'll load up a clean copy of Win2000 server on a spare drive and see if I can get it to run. I'll let you guys know what I find.

That qualifies as cool.

I feel a *bump* coming on...........

wait for it................................

..................................................................................*BUMP*.........................................................................

Slow

Link to comment
Share on other sites

OK, I have read in other threads that other peeps have stated that you need to have the Ageia drivers installed on a SADS box in order to have SADS run. Is there anyone that can confirm that fact????? Point being is that I went to the Ageia website to get the drivers and that it states that the drivers are for "XP/Vista RC1" only. Is this the culprit????

So downloaded the drivers and installed them.....they actually installed......however STILL NO GO

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...