Jump to content
Ghost Recon.net Forums

shiver

Members
  • Content Count

    111
  • Joined

  • Last visited

Posts posted by shiver

  1. @ shiver: good idea on the mb: get a new 1... it might take a while but if the mem is incompatible then its really not worth the $$$/hastle

    El Pantera

    I really like this new gigabyte mobo... I wanna keep it, but I'm still

    going to ask asus to replace or fix the asus mobo. Cause now with

    win 98 running on it, it tells me win xp should work also.

    I read a post where someone just took the hsf retention bracket off

    the asus mobo and used an exacto knife to cut a little channel between

    the 2 solder points that were accidently making contact and it solved his problem. It no longer shorted

    and the cpu was able to pass the self test.

    @chems, although it's been rough lately with all the pc troubles,

    I also feel good in a crazy way that I experienced this stuff... I've

    learned a lot in the past few weeks. I was pretty much feeling like

    I'd never try to build another pc, but not so much anymore.

    I bet it's a great feeling if you learn enough about pcs to be able

    to have complete control over it. Then it becomes a thing where you

    want to push the envelope and see just how much performance you

    can get out of it. :) I wanna over clock mine once everything is running

    well. Right now we have the cpu running at 3.2 ghz w/ a fsb of 800

    and my twinx 3700 dimms running @ 400 mhz.

    I'm seeing ppl take 2.4 ghz p4's and run them at 3 ghz with complete

    stability.

    I'm installing my sound card on it today along w/ the software

    even though I'll be reformatting the drive again later this week

    to install xp. I'm going to also set up a raid array. And I also need

    to get the rest of the fans working. I have a panel w/ 2 fans that swings

    out or can be removed altogether. Right now it's disconnected. Makes

    it easier to install boards when it's removed completely.

    I have monday off and want to try and finish that wheel for you today or tomorrow if I can. The textures are done for the most part. Now it's a matter

    of applying them to the object.

  2. welcome back there chems,

    hope you had a nice vacation.. wtg on those exams. ;)

    I have managed to make some progress w/ that little project

    you left me off with, it would've been done by now if it weren't for

    all the troubles w/ the new pc. My appologies.

    My friend jhereg told me it's possible there's a corrupted file

    on the xp cd he gave me. So that might be what's stopping me

    from installing it. He had me try installing win '98 and that worked

    fine. He's sending me another xp cd so I'll be able to try it again

    later on this week.

  3. Hey, I am a huge SST fan (movie, series ,etc. ,look at my av.), and this mod is looking really good, great work Chems! I always hoped a SST 1st person shooter/mod would be made!

    guess i'm a bit late, 21 pages behind <_< (how come I never heard of this forum?)

    better late than never I always say.

    Chems should be back today actually.

    an update to my ongoing computer nightmare: I can get into the bios

    but I can't install windows xp due to my ram being incompatible w/

    this new gigabyte board.

    Someone figured out the problem w/ the Asus board. They removed the

    heatsink retaining bracket.. , it's that square piece of plastic that the retaining arms hook into, and found a solder point hadn't been cleaned

    during the manufacturing process. This leads to it being smushed down

    when you apply the pressure of a heatsink fan. It flattens out and hits

    another solder point causing the board to short out in that area.

    This in turn causes a lack of power to the cpu which causes the cpu

    to fail it's test. Hence you get "system failed cpu test" from the vocal post.

    I'm calling Asus Monday Morning. I'm requesting a new board. I plan

    to rma the new gigabyte board back to the retailer because it's limitations

    prevent me from using it. It's cheaper to get the asus board replaced

    rather than buying a gb of new memory.. I might have this computer working

    by christmas if I'm lucky. :wall:

  4. hehe, right :-:-"

    hey stalker,

    just cause I'm of a curious nature, could you tell me how that

    2nd word is pronounced in english? Does it sound like an english word.

    Like I've heard what sounds like danka shay or danka shane.. is that

    how sehr should sound?

  5. I'm a noob when it comes to computer building, a friend who's an IT specialist actually

    built the pc for me at my house while I looked on. He made all the necessary settings

    in the bios. I don't think he adjusted the memory and cpu settings but I could be wrong.

    Cause when we ran sisoft sandra, the memory was showing up as pc 3200 which was

    incorrect. It's 3700. But I think by default, the bios usually starts out w/ conservative

    settings.

    Anyway, it wasn't anything that my friend or I did wrong, it's the mobo.

    I know there's a lot of people using the asus p4c800 and haven't had any trouble

    with it. Great, they're lucky, cause there's also a number of people that have had

    problems, the same problem as me. They found they could resolve it though by

    filing down the retention arms a bit. This is a crude way of easing off on the amount

    of presure be placed against the cpu. It's worked for those that did it, but I didn't

    wanna do it.

    I got the new mobo today as expected.

    Spent the night installing the cpu, cpu heatsink fan, memory, and video card.

    Afterwards I hooked it up to the monitor and keyboard.

    I crossed my fingers and hit the power button.

    Houston We Have Post!!! Thank God! :)

    I spent some time changing some of the settings in the bios.

    Now I'm gonna get some sleep and continue in the morning.

    Hope I have better luck w/ this one.

  6. expecting a new mobo today. Let's hope this one works better than the 1st one

    so I can get back to work on this mod.

    It's a Gigabyte GA-8knxp for all you computer builders out there.

    The the 1st one was the Asus p4c800. It ran great after the pc was built.

    I was very impressed.. until I shut it down and found that it wouldn't start back

    up again. :wall:

  7. A friend came over and built my pc on Sat.

    It was an all day affair. Finally had it up and running with

    all the hardware installed and the os installed.

    He then downloaded some bench marking software.

    Sisoft sandra and future mark 3d.

    The score on sandra was in the ball park compared to

    similar systems.

    score = 5765

    I ran the burn in on sandra over night.

    This afternoon I stopped it after 14 hrs.

    I clicked around in xp checking out the menus and stuff..

    my 1st time seeing xp.

    I shut down the pc.

    I set up a kvm.

    Started my old computer and the kvm worked fine.

    When I started the new pc I could hear a high pitched

    tone, just a straight tone non-stop.

    The monitor is flashing a No Signal screen.

    Shut down both pcs.

    Unhook the kvm and run the monitor directly to the new pc.

    Start it up and the same thing. A loud straight high pitched tone.

    I shut down again.

    Removed the side panel and started the new pc again.

    Same tone. All fans working properly. Even the fan on the vid card

    is working.

    Shut down the new pc.

    Pulled out the video card and stuck it in my old pc.

    The old pc booted fine. SO it's not video card.

    Even started the new pc w/ no video card. Same loud sound.

    Switched the twinx modules, took them out of the black slots

    and put them into the blue. Still the same loud high pitched

    tone. I'm stumped. I'll try calling Asus to see if they can

    give me some help. Anyone got any ideas ?

    Just a reminder:

    p4 3.2 ghz

    asus p4c800 mobo

    ati all in wonder 9800

    1 gb of corsair twinx 3700 467 mhz

    1 80 gb western digital to boot and run main apps from.

    2 80 gb western digital set up in a raid0 stripe array.

    highpoint rocket raid 404 raid controller.

    pwr supply = antec true blue 480.

    case= thermaltake xaser III

    CPU heat sink/fan= thermaltake spark 7.

    sony dru - 510a dvd -r/+r -rw/+rw cdrw

    Sony floppy drive.

    LG electronics cdrw

    I sent something to asus letting them know, maybe they'll know

    something.

    Any help would be greatly appreciated.

  8. A friend of mine came over yesterday and put together my new computer for me.

    It was an all day affair, the system is pretty complex. Afterwards we ran some benchmarks.

    On future mark it scored 5765 which was pretty much in the ball park compared to other

    systems. I set up a kvm today and everything has turned ugly now. The new computer

    only makes a loud pitched noise and won't boot, no video signal as well. :(

    Can't even enter the bios.

  9. sorry, chems is the boss... ;) but I can tell you that the layout of the map

    is suited well in my opinion for not only sp missions but mp as well

    and for me, as far as maps go, it's going to be better than anything else

    I've done so far but this is only my 2nd real map. Chems came up with

    the design and I'm just trying to match what he had in mind as well as possible, I've tried to embelish it in some ways as well..

  10. Harntrox,

    normally isn't you that has the responsibilty of contacting those

    modders whose work you wish to use?

    I've seen other modders propose similar kinds of projects and make similar

    announcements saying unless you contact me saying you don't want

    your work used I will assume I have your consent and will credit you.

    Other modders would then jump in warning that the modder needs

    to contact those whose work he wishes to use because it's not the

    content creators responsibility to know what other modders are planning

    to use their work for.

    It doesn't involve me, but if it did I wouldn't even care.. Someone else might not feel the same way though and it seems the only way he/she has of learning of what you're intending to do is to come by and read your post.

    Is this a different set of circumstances?

    Is it assumed that any work used in Drag mods belongs to Drag and therefore crediting individual modders for their work isn't a priority, much

    less asking their consent?

    Hope you don't misunderstand, I'm not trying to make trouble, just sighting

    what seems to be a past precedence amoungst the modding comunity

    so please don't flame me. ;)

  11. just to expand on deleyt's very detailed help, regarding the boolean part of the operation,

    you can do this with textured objects. I did it with a tree that was already textured and took

    a smaller tree that was textured and booleaned it to the larger tree. It worked fine.

    edit: When I say tree I mean trunk, I didn't boolean anything that was grouped.

  12. Awww thanks shiver, but you know ppl hes a bit of a dark horse. You should see his map and the textures he can create, there awesome! Wait till you guys see his map then youll be wondering whos the boss of this project! Also ive got another two emails from Jack57 saying hes making even more progress, man has that guy got a sharpe mind. I have to read it twice to keep up. Thanks team!

    :huh: Me? no way...I suck... but maybe someday, yes...someday :rolleyes:

    NAAAA!!!!!!! What the hell was I thinkin!?

    :punk:

  13. starship troopers hasn't been released yet so none of us can get it but

    you'll need ghost recon to play it.

    chems, the special thing that you're talking about, is that the thing

    you showed me? The one where I told you I said "Oh! Oh! Oh! WoW!"

    If so, then I think everyone's gonna be in Shock & Awe when they

    see what it is... I meant to tell you that earlier but forgot.

    I have to say , you are really amazing, I wouldn't be surprised to see

    you get offered a job with a game company...and to think you've only

    been at it a short while. :thumbsup:

  14. In the Stereo Properties Panel, there is a HUGE a-z of games, each one rated for it's performance in 3-D.

    If anyone wants me to look up a particular title's rating just ask. It doesn't list RVS or Splinter Cell, so the last update was maybe a few months ago - but at least you can check your collection out :)

    Homeworld doesn't run in 3-d at all which is a shame.

    rocky,

    can u look up how MW4 Mercs "Rates" on the system ..

    thanks,

×
×
  • Create New...