Streinger

There is a stargate mod in the make..look it up on the forum, screenies are looking great!

http://www.fjvollmer.com/New%20Folder%20(8.../new_page_9.htm Not M16 PER SE, but a very close match...IMHO usable for M16 texturing http://www.fjvollmer.com/a11/7/f.htm Again, not M4, but with a little adjusting, usable for M4 texture..sufice to say I used those pics for my M4A5 texture... PS: A little advice; those pics were obviously taken under some green reflector light...play with colour "hue" and "saturation" in Adobe PS 'till you get the green glow out..

I guess you haven't received my e-mail yet...and as a reply to you (and all other players out there who enjoy our mod) here's the current status of an update; there's not going to be an actual update, PER SE, but rather a whole new mod, namely CROATIAN ARMY 2.0- OPERATION STORM There's so much new stuff we intend to implement to the mod, that an update would be bigger then the original mod. Our team has narrowed down to just Black Sabbath and myself, so the work is going painfully slow. We intend to change all the weapons with new models (some of you I'm sure have seen posted renders

Three Chinamen, Bu, Chu and Fu imigrated to the USA, and upon arrival, decided to americanise their names. Bu changed his name to Buck, Chu changed his name to Chuck, Fu...had to go back to China!

Infantry/medic, 61st company, 140th brigade TRD (Croatian abrivation for Cannon and Rocket Division), backup/ logistic to the 2nd Guard Brigade of Croatian Army, The Thunders. Served till '91 to '95, thinking about getting back to active duty...

Some time ago, @Bilee asked me about my real-life expirience with M-70 (Yugoslavian AK-47 clone) Here's my reply to him, as it brings the atention to one of (IMHO) best version/clone of AK-47 available...

Croatian Army Mod v1.0 has H&K G3...

AK-74 uses 5.45x39mm cal. To the best of my knowledge, it's as reliable as AK-47. The trajectory of the bullet is indeed more flat and in that way somewhat simillar to the 5.56 NATO round. I cannot tell you about it's penetration power, but I have also heard (from a reliable source) that once the round enters the body, it losses it's stability and starts to tumble, so it does make some prety nasty wounds.

Hope this will make you critics happy @Piccolo, are you saying the suppressor should be like this: I must say I did saw a pic of M4 with detachable (screw-off) barrel end, so I used that pic as a reference when modeling M4A5 SD. The gun with a suppressor like on the render above looks too long to me... I guess AUS_Viper will have to contact his advisors in ADF and check out just what type of barrels Australian SASR have on their M4A5s.

Speaking of that, mate..the Guinness was too warm, and I speciffically requested red-head twins, not blondes... Keep the beer cold and the girls hot or I might take that RSE idea under consideration...

There you go! You give them a finger, and they grab your entire arm! lol...just kidding...you are right, it is a bit small.

I remember when I put up the renders of my FN MAG for ADF Operation Stabilise mod, somebody asked will it be Aussie or a tango weapon. We had to dissapoint all of the players looking forward to play with this meat grinder, as it was intended to be a tango only wep. Since then, AUS_Viper did some aditional research, and it turned out that like many other armies, ADF also uses FN MAG/ FN 58 as a heavy support weapon. So there it is, FN 58...we wanted to make it somewhat different from a tango version, so wooden stock is replaced with more modern OD green plastic stock. Also, AUS_Viper's contac

Good job, man One question, though..why didn't you go all the way and model the trigger and the trigger guard? The model is so good that IMHO you should go ahead and add those parts to the model, it would make it look almost lifelike.

It's in "patches", as you put it, because the weapon isn't actually painted in cammo, it's taped over with cammo-patterned duct tape. When you tape over the gun, some parts you just have to leave un-taped, like the fire selector, brass ejection port, bolt assist...pistol grip is also usually left un-taped. It's not visible in combat situation anyway, since it's covered with shooter's hand. Also, you can't put duct tape over a barrel..for obvious reasons (heat) Here's an actual pic of an Aussie soldier in East Timor in 1999: Now, this is F88 Steyr Aug, but if you look close enough, you'll

M4A5/M203 with Elcan scope in Aussie cammo...

F88 Steyr Aug 508mm barrel F88 Steyr Carbine 407mm barrel F88 Steyr Aug Commando 350mm barrel F88 Steyr Aug with Elcan "Wildcat" scope and Aussie cammo duct tape treatment Steyr "Shadow" SD, integral suppressor version F88 Steyr Aug with M203PI grenade launcher are these good enough for you? Go to AUS Viper's Ghost Recon Mods to see more renders and in-game screenies...

@de_nome_lanicon, read the posts more carefuly...under the first render, it says M4A3, but the Australian designation for this weapon is M4A5. It's the same M4 with detachable top handle the US forces are using..just different designation. It has single and ful auto fire mods only, and it's equipped with Elcan "Wildcat" scope since the Australian SASR puts it on most of their weapons.

M4A3 (Australian designation for this weapon is M4A5) equipped with Elcan "Wildcat" scope... ...SD version..this one will be a specialist's weapon... ...and M203 equipped version..this one will also be available in Aussie cammo.. To see some in-game screenshots and find out more about this upcoming mod, based around Australian SASR, go to AUS Viper's Ghost Recon Mods

I belive the designation is L86..maybe I can find some pics of it to post them, it looks like it's definetly it.

@Shadow, stop torturing us and upload the mod already!! Seriously though, I can only imagine how big this project must be, with all the characters, attachments, weapons,sounds, vehicles and maps...I'm sure the final product will be well worth the wait

Island Thunder has a SOCOM SD in it..but @Earl's Standard Upgrade mod packs much better SOCOM and a lot of other goodies..like SR47..

Yup, I have a level 4 vest...some 2cm thick kevlar, with 0,5cm steel plates front and back. The whole thing weigths 12,5kg (25-26lbs) It's Belgium made, but I can't make out the maker..it has a big "Z" logo, and on the inner side I found "ZUNBLINDAGE" and a serial number. Anyway, we once fastened such vest around a log and fired at it with 7,62x25mmTT pistol. (a very penetrating calibre, BTW) The vest endured the shots with no signs of damage..we never tested it with a rifle, though...

A simmilar problem happened to the Germans in Afganistan during the peace keeping mission..thier boots started to came appart due to the heat.

They don't eat pork so they have low-fat content..

How about this one: Actual Elcan "Wildcat" reticule and here's my in-game replica for GR: This reticule will be a standard for all ADF Operation Stabilise weapons equipped with Elcan sights (Steyr F88 "Wildcat", M4A5 and FN MINIMI) Here's a render of Steyr F88 "Wildcat" (although it's been posted before) and a close-up of Elcan: PS: another piece of info on this upcoming mod (also been posted before, but in case you missed it): we intend to implement real-life zoom values for all the weapons; for example, F88/M203PI will have 1.5x zoom, and F88 "Wildcat" (and other Elcan equippe