Jump to content
Ghost Recon.net Forums

Recommended Posts

CENTCOM ISSUES

If you have a issue, glitch, problem, post it here.

POST

IKE.Log < Found in Red Storm/GR Folder. (Not the IKE Crash log)

Take a screenshot by pressing F4 if needed. (Stored in your GR Folder)

Pls give details of exactly what was going on at the time.

Pls only post in this topic if you have the above.

Tinker

0:)

Share this post


Link to post
Share on other sites

:whistle:

>>Same topic, same message<<

If anyone else is having problems with the CENTCOM mod, please put op a short overview of your setup and issues, like:

  • What are your computer specs (processor, memory, GFX, etc.) and on what settings are you playing CENTCOM. Low-end computers (low memory, processor and/or graphix card) can suffer framerate dropdown. Try to play with all GFX settings on 'low' and see if the problem still occurs.
  • Did you patch (Patch1_v3.0) your missions/ centcom to fix some minor mission errors?
  • Do you still have the same issues if you run Ghost Recon with the activated mods in the following order:
    - Desert Siege
    - Island Thnunder
    - CENTCOM
  • Where, when and how is your error comming forward (startup, campaign, multiplayer, during savegames, etc.)?
  • Where did you get the mod from? Which package is it (the 'full-7z file' or 'three-zipped packages')?
  • Did the installation went according plan, no error messages, in case of the three packages: did all the files go into the same centcom folder?
  • If you experienced a 'Crash To Desktop' (CTD) post your 'ike.log' (located in your 'Ghost Recon' folder) together with your own findings as stated above. It usually puts more insight on where the error can be found.

;)

Edited by Toniezz

Share this post


Link to post
Share on other sites

Sry Toniezz

I have changed the tital to Centcom Mission Issues, as i will happily look into anything that is posted here, concerning Missions only.

Tinker

:thumbsup:

Share this post


Link to post
Share on other sites

Sry Toniezz

I have changed the tital to Centcom Mission Issues, as i will happily look into anything that is posted here, concerning Missions only.

Tinker

:thumbsup:

Sorry, I'm at work and can't get too techinical but here is the only problem I am having at the moment. On mission 4, I take over the prison camp, eliminate the escaping prisoners, rescue the CIA agent, drop him back off at the truck and it says I have everything complete but nothing happens. I can't seem to see an extraction point.

I downloaded the missions patch last week so it is patched to the current verion (assuming I patched it correctly). Any help would be appreciated.

Share this post


Link to post
Share on other sites

After returning the CIA to Insertion did you get this message:

Move your entire team to point Delta (located on your command map).

<_<

Tinker

Share this post


Link to post
Share on other sites

After returning the CIA to Insertion did you get this message:

Move your entire team to point Delta (located on your command map).

<_<

Tinker

No,

but Jay helped me out through the PM. Great support on this mod. I appreciate all the help.

Share this post


Link to post
Share on other sites

Update:

Pls post positive ideas or issues only.

Thnx

Mission 01

Issue: Shooting the Spotlight CTD

Solution: The tower is a vehicle, remove it, add sentry post and gunner.

Mission 02

Issue: CTD on mission start

Solution: Take out invalid Response in startup Block.

Mission 04

Issue: No Extraction sometimes.

Solution: Add a Green Extraction Zone plus new message. (Maybe a few extra baddies?)

Mission 10

CTD muliplayer on startup for some

Solution: Remove Fog and Insertion holding period.

Mission 11

Issue: CTD after Quick Save.

Solution: Remove invalid zone.

Pls post your issues, I will do my best to make things work.

Tinker

:thumbsup:

Share this post


Link to post
Share on other sites

well I'm sorry about this, but I'm upset...I just looked at my original script for mission 2 and there is a significant difference between it and what was released...in other words my work was modified without my knowledge or my permission....I understand that it had to be to a small extent to make it part of the campaign and fully expected that but the revisions I see went beyond that...if any of these blocks are what have been causing the CTD issue then I damn well don't appreciate having my name and reputation associated with it! I take pride in my diligence regarding CTD issues and want to know exactly which "invalid response" is causing this problem, if it is one of the original blocks my apologies to those who have been afflicted with this annoyance while trying to enjoy a wonderful game, if it is something that was added or altered in my script then I want a public apology made to myself and to those who experienced this problem....I for one do care that people have been having these CTDs and don't want them believing I dumped it on them if it is not true...

BTW Tinker, #2 and #8...but at this point I'm not in the mood to mess with what I did not do...

mig :ph34r:

Share this post


Link to post
Share on other sites

well I'm sorry about this, but I'm upset...I just looked at my original script for mission 2 and there is a significant difference between it and what was released...in other words my work was modified without my knowledge or my permission....I understand that it had to be to a small extent to make it part of the campaign and fully expected that but the revisions I see went beyond that...if any of these blocks are what have been causing the CTD issue then I damn well don't appreciate having my name and reputation associated with it! mig :ph34r:

:mellow:

Edited by GregV

Share this post


Link to post
Share on other sites

No worries Mig, know how you feel. :(

Anyhows, the invalid Response is yours :D

Disable the Extraction script blocks.

They were never Enabled.

Tinker

0:)

Share this post


Link to post
Share on other sites

well I'm sorry about this, but I'm upset...I just looked at my original script for mission 2 and there is a significant difference between it and what was released...in other words my work was modified without my knowledge or my permission....I understand that it had to be to a small extent to make it part of the campaign and fully expected that but the revisions I see went beyond that...if any of these blocks are what have been causing the CTD issue then I damn well don't appreciate having my name and reputation associated with it! I take pride in my diligence regarding CTD issues and want to know exactly which "invalid response" is causing this problem, if it is one of the original blocks my apologies to those who have been afflicted with this annoyance while trying to enjoy a wonderful game, if it is something that was added or altered in my script then I want a public apology made to myself and to those who experienced this problem....I for one do care that people have been having these CTDs and don't want them believing I dumped it on them if it is not true...

BTW Tinker, #2 and #8...but at this point I'm not in the mood to mess with what I did not do...

mig :ph34r:

:hmm: I've played mission 2 about a dozen times now and have not had a single CTD. I just downloaded the mod about a week and a half ago when the mission patch was already out so I downloaded both. I don't know if this is what is keeping me from having the issues that others have had but I really enjoyed the maps and missions.

Share this post


Link to post
Share on other sites

No worries Mig, know how you feel. :(

Anyhows, the invalid Response is yours :D

Disable the Extraction script blocks.

They were never Enabled.

Tinker

0:)

If I added that I have no file on hand with it in it except what I dld.....It just does not seem like my style and I have no memory of needing an extraction Group...

here is what I have in my development mod folder for CENTCOM...STARTUP and Preaction

Trigger Event:

The simulation is starting.

Responses:

Set Player to (The player-controlled platoon).

Set AA to false.

Set Leader to false.

Set Mosque Door to true.

Set OPFOR to false.

Set Cine to true.

Make all members of C undetectable.

Group: <Default>

Comment:

Trigger Event:

The simulation is initializing.

Responses:

Set Objs Complete to 0.

Set Insertion to (A random integer between 1 and 3).

Once again, I do not remember any senario including an Extraction Group or any alternative endings....if I did I have no records of such changes...hell, I was happy with Mr Melon Picker and considered the job done....

mig

Share this post


Link to post
Share on other sites

No worries Mig, know how you feel. :(

Anyhows, the invalid Response is yours :D

Disable the Extraction script blocks.

They were never Enabled.

Tinker

0:)

If I added that I have no file on hand with it in it except what I dld.....It just does not seem like my style and I have no memory of needing an extraction Group...

mig

No problem. It`s not mine, i use CAPS all the time. There is an Extraction Block in there that works fine, this just wants taking out as it is not needed and ensures there are no other issues Mig.

p.s. Just uploaded a B-52 Bomb Run!

:whistle:

Share this post


Link to post
Share on other sites

It's not Mig's, it's not Tinker's.... isn't it possible that anyone else modified the mission?

Remember that .mis are completely open source and everyone can have access to code and modified/improve/break the code.

Share this post


Link to post
Share on other sites

here is my Obj 4

Group: <Default>

Comment:

Obj4 Complete

Trigger Event:

3 second(s) elapsed.

Responses:

Allow this block to be reactivated.

Continue executing responses if ((The value of KIA) is equal to 5).

Mark 4-Pacify The Taliban complete in the objective list.

Increment Objs Complete.

Prevent this block from being reactivated.

seems more than possible....

Share this post


Link to post
Share on other sites

Any chance you could send me your file?

I want to try and post a new pk shortly, containing all issues in these posts. If your file has no issues, saves me the time.

Now go bk to P2

Tinker

:P

Share this post


Link to post
Share on other sites

well it will need to have the unlock next hero thing done...and there would be no extra obj..

mig :ph34r:

Share this post


Link to post
Share on other sites

UPDATE :D

Centcom Issues:

Vehicles

Vehicles that will CTD on Start-Up

Blackhawk_Down

bmp1a_afghan1

hummer_apc_autogl_desert

hummer_apc_hmg_desert

Vehicle that will CTD if you shoot the spotlight

v_tower

Every other vehicle good.

I have a file for every good vehicle here to view in Igor, or wotever it is meant to be. Will include in Patch for modders. Also a character viewer file. And Staionary weapons too. No issues on CHR or Weapons so far.

Also some of them are just far too much for the average PC, to have even more than 1 or 2 showing. But there are lot`s of new stuff, that`s great in large portions! Upto the modder.

There`s not much get past me

:shifty:

Back to the Topic!

:zorro:

Missions

Centcom Campaign

All possible fixes applied

Package

Will include Lighty`s missions (Make sure all have them!)

:thumbsup:

Will include 12 Fun Missions from me (9 complete today ;) )

:shifty:

Also, I put the invite out to anyone who has made a mission for Centcom, send it me, it goes in the Box!

<_<

Noting problems here, pls keep this to Mission Issues only.

Tinker

Tinker

Share this post


Link to post
Share on other sites

Good job Tinker! :thumbsup:

Though one small question (don't feel offended buddy): are you on holidays or what? :rocky::rolleyes:

Keep it up! :o=

Share this post


Link to post
Share on other sites

Lightys mission "funnel web", has a bug, if you press "esc" after finding the intel (to find out whats next objective) , you will have a CTD.

Share this post


Link to post
Share on other sites

Lightys mission "funnel web", has a bug, if you press "esc" after finding the intel (to find out whats next objective) , you will have a CTD.

This i am sure is due to not using GROUPS. Objective 2 is added to the objection list twice.

Tinker

:thumbsup:

Just getting over an injury Toniezz, not long left! :)

Share this post


Link to post
Share on other sites

Tinker, please, if possible, could you make a mission using that "air strike tools" stuff ive checked in the download tool - modding section - looks damn cool.

Edited by GregV

Share this post


Link to post
Share on other sites

Tinker, please, if possible, could you make a mission using that "air strike tools" stuff ive checked in the download tool - modding section - looks damn cool.

@Greg, i am just trying to make Centcom more playable, will try include something similiar.

Well i have already included 1 mission with the B-52 going overhead at random times on a night map!

:P

@Toniezz, thnx for the link: http://ghostrecon.3dretreat.com/grspecialists.htm

Nigel Tunney

Demolitions

"You! Hold my pint while I get the satchel charges. Yes, of course I'm kidding, you stupid b*****d - you think I'd trust you with the beer?"

:rofl:

Tinker

Share this post


Link to post
Share on other sites

lol :rofl:

I hope your injury isn't that permanent, on the other hand you will be able to do all this work for even longer :hmm: naaah!

Get well soon Buddy!

Those profiles are pretty funny aren't they? Even better worked oout than the GRAW profiles they put out these days.

Viva La [GR]!!

Edited by Toniezz

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×