Tinker Posted March 11, 2007 Author Share Posted March 11, 2007 After returning the CIA to Insertion did you get this message: Move your entire team to point Delta (located on your command map). Tinker No Objective counter is being Incremented, but needs inistialising. Only last guess Do you have to make a counter before you can increment/decrement ? Quote Link to comment Share on other sites More sharing options...
Suicide Commando Posted March 12, 2007 Share Posted March 12, 2007 Just wanted to say that it's very cool of you guys to fix these issues. Thanks gents. Quote Link to comment Share on other sites More sharing options...
Toniezz Posted March 12, 2007 Share Posted March 12, 2007 (edited) Objective counter is being Incremented, but needs inistialising. Only last guess Do you have to make a counter before you can increment/decrement ?I think you mean "Do you have to set a counter before you can increment/decrement ?". This is for me also uncertain if that counter needs be be set (at startup for instance) to a value before you can make use of the 'Increment/Decrement' script. I always make an 'INI COUNTER/FLAGS' startup script where I set all my counters and flags to the right parameter, to be on the safe side. For instance: Group: <Default> Comment: * 00 - INI COUNTER/FLAGS Trigger Event: * The simulation is starting. Responses: * Set CNT - OBJ1 to 0. * Set CNT - OBJ2 to 0. * Set CNT - OBJ3 to 0. * Set CNT - OBJ4 to 0. * Set FLG - OBJ1 to false. * Set FLG - OBJ2 to false. * Set FLG - OBJ3 to false. * Set FLG - OBJ4 to false. * Set CNT - FOGFAR to 100. * Set CNT - MAXSPOT to 90.If possible I prefer to use the 'CounterSet' in combination with 'GetDifference', 'GetProduct', 'GetQuotient' and/or 'GetSum', above the 'CounterIncrement/-Decrement' script. For Instance: Group: <Default> Comment: * 00 - FOG DECREASE Trigger Event: * TMR - FOGSET has expired. Responses: * Allow this block to be reactivated. * Set CNT - FOGFAR to (The result of (The value of CNT - FOGFAR) minus 1). * Set CNT - MAXSPOT to (The result of (The value of CNT - MAXSPOT) minus 1). * Change the maximum spotting distance to (The result of (The number (The value of CNT - MAXSPOT)) minus 1). * Turn on fog with color 175,169,131 between 0 and (The result of (The number (The value of CNT - FOGFAR)) minus 1) meter(s). * Set TMR - FOGSET to expire in 60 second(s). * Continue executing responses if ((The value of CNT - MAXSPOT) is less than or equal to 55). * Cancel TMR - FOGSET. * Prevent this block from being reactivated.Above code could be written with the use of the 'CounterIncrement/-Decrement' script. Though I am just a beginner in igor (just started 2 months ago and finished only 2 missions), but I feel this way you have more control over your scripting (sounds funny). I tried above script with the 'CounterDecrement' script but that didn't work for me. Thats why I changed to the script above and use those combinations over the 'Increment/Decrement' scripts. Well, just an approach from a "advanced igor rookie". Edited March 12, 2007 by Toniezz Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 12, 2007 Author Share Posted March 12, 2007 Oki You DO NOT need to add a Counter Set, if it is to be set to 0. It will be fine. Test: Group: <Default> Comment: Test Loop Trigger Event: 1 second(s) elapsed. Responses: Allow this block to be reactivated. Continue executing responses if ((The value of Test) is equal to 2). Display "Test Complete" to all players. Group: <Default> Comment: Test Init Trigger Event: 5 second(s) elapsed. Responses: Allow this block to be reactivated. Increment Test. Results: Message was displayed. Tinker Quote Link to comment Share on other sites More sharing options...
Toniezz Posted March 12, 2007 Share Posted March 12, 2007 Kool Thanx! Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 12, 2007 Author Share Posted March 12, 2007 Sorry, I'm at work and can't get too techinical but here is the only problem I am having at the moment. On mission 4, I take over the prison camp, eliminate the escaping prisoners, rescue the CIA agent, drop him back off at the truck and it says I have everything complete but nothing happens. I can't seem to see an extraction point. I downloaded the missions patch last week so it is patched to the current verion (assuming I patched it correctly). Any help would be appreciated. The only possible way to have the message appear on screen is by: Area Secure Objective CIA Agent Dies These are the only 2 Counter Increments in the script, this is why it only works if you kill the CIA Agent. Mission Extraction is activated, but you just have no idea were it is at this point. Solution: Add a Counter Increment for Extracting the CIA Agent. Tinker Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 12, 2007 Share Posted March 12, 2007 ***** User's system configuration ***** CPU: GenuineIntel 1793 MHz Pentium 4 RAM: 512 MB O/S: Microsoft Windows 2000 5.1 Service Pack 2 build 2600 Ghost Recon (RELEASE) version = 1.4.0.0(0) RSDisplayMgr::CreateGameWindow: Creating a 1024x768 window at 0,0 on monitor Plug and Play Monitor attached to NVIDIA GeForce4 Ti 4600 RSDisplayMgr::CreateGameWindow: Game running on primary display Plug and Play Monitor attached to NVIDIA GeForce4 Ti 4600 HAL (hw vp): NVIDIA GeForce4 Ti 4600 R5G6B5 RSFILEDATA: FindFile could not find file ike_fx_fire_type2.tga RSFILEDATA: FindFile could not find file ike_fx_fire_type2.rsb Unable to find ike_fx_fire_type2.tga anywhere. RSFILEDATA: FindFile could not find file lighthalo_effect3.rsb RSFILEDATA: FindFile could not find file lighthalo_effect3.rsb Unable to find lighthalo_effect3.rsb anywhere. RSSoundMgrPC: Selecting sound device SoundMAX Digital Audio driver is smwdm.sys RSFILEDATA: FindFile could not find file darkmap0mainmenu.rsb RSFILEDATA: FindFile could not find file darkmap0mainmenu.rsb Unable to find darkmap0mainmenu.rsb anywhere. SOUND: Cannot Find: CEN_briefing.wav RSFILEDATA: FindFile could not find file darkmap0d_mainmenu.rsb RSFILEDATA: FindFile could not find file darkmap0d_mainmenu.rsb Unable to find darkmap0d_mainmenu.rsb anywhere. RSFILEDATA: FindFile could not find file 13-seal rifleman_desert.chr RSFILEDATA: FindFile could not find file 13-seal rifleman_a_desert.chr RSFILEDATA: FindFile could not find file 13-seal rifleman_b_desert.chr RSFILEDATA: FindFile could not find file 13-seal rifle head_blink_desert.rsb RSFILEDATA: FindFile could not find file 13-seal rifle head_desert.rsb RSFILEDATA: FindFile could not find file des_helmmic_m04_blink_desert.rsb RSFILEDATA: FindFile could not find file des_helmmic_m04_desert.rsb RSFILEDATA: FindFile could not find file des_helm_m04_blink_desert.rsb RSFILEDATA: FindFile could not find file des_helm_m04_desert.rsb RSFILEDATA: FindFile could not find file 15-spec cap_desert.chr RSFILEDATA: FindFile could not find file 15-spec cap_a_desert.chr RSFILEDATA: FindFile could not find file 15-spec cap_b_desert.chr RSFILEDATA: FindFile could not find file 15-spec cap head blink_desert.rsb RSFILEDATA: FindFile could not find file 15-spec cap head_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifleman_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_a_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_b_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifle head_blink_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifle head_desert.rsb RSFILEDATA: FindFile could not find file des_helm_m04_blink_desert.rsb RSFILEDATA: FindFile could not find file des_helm_m04_desert.rsb Loading map d:\red storm entertainment\ghost recon\mods\centcom mod\map\wm03_mines_beta\wm03_mines.map SimGun: Gun node Mine 1 has no camera offset helper point. SimGun: Gun node Mine 2 has no camera offset helper point. SimGun: Gun node Mine 3 has no camera offset helper point. SimGun: Gun node Mine 4 has no camera offset helper point. SimGun: Gun node Mine 5 has no camera offset helper point. SimGun: Gun node Mine 6 has no camera offset helper point. SimGun: Gun node Mine 7 has no camera offset helper point. SimGun: Gun node Mine 8 has no camera offset helper point. SimGun: Gun node Mine 9 has no camera offset helper point. SimGun: Gun node Weapon 430 has no camera offset helper point. SimGun: Gun node Weapon 440 has no camera offset helper point. SimGun: Gun node Mine 10 has no camera offset helper point. SimGun: Gun node Mine 11 has no camera offset helper point. RSFILEDATA: FindFile could not find file 13-seal rifleman_desert.chr RSFILEDATA: FindFile could not find file 13-seal rifleman_a_desert.chr RSFILEDATA: FindFile could not find file 13-seal rifleman_b_desert.chr RSFILEDATA: FindFile could not find file 13-seal rifle head_blink_desert.rsb RSFILEDATA: FindFile could not find file 13-seal rifle head_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifleman_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_a_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_b_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifle head_blink_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifle head_desert.rsb RSFILEDATA: FindFile could not find file 15-spec cap_desert.chr RSFILEDATA: FindFile could not find file 15-spec cap_a_desert.chr RSFILEDATA: FindFile could not find file 15-spec cap_b_desert.chr RSFILEDATA: FindFile could not find file 15-spec cap head blink_desert.rsb RSFILEDATA: FindFile could not find file 15-spec cap head_desert.rsb RSFILEDATA: FindFile could not find file des_helmmic_m04_blink_desert.rsb RSFILEDATA: FindFile could not find file des_helmmic_m04_desert.rsb Crashing right at start of mission 6 where you start by meeting the informant to get location of Taliban leader. Crashes at "mission loading" screen two times in a row. Gave up after that. Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 12, 2007 Author Share Posted March 12, 2007 Would you mind going to START/SEARCH Then type in: des_helmmic_m04_desert.rsb Leave it to run and post the result. Looks like you are missing some files there so far. Tinker Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 12, 2007 Share Posted March 12, 2007 It says "Search is complete. There are no results to display". Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 12, 2007 Author Share Posted March 12, 2007 It says "Search is complete. There are no results to display". DOWNLOAD CENTCOM What that means is, you don`t have the file that Centcom has. Corrupt or bad download. Sry about that. But as you saw, there were many files just for this problem missing. Tinker Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 12, 2007 Share Posted March 12, 2007 Ughh Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 13, 2007 Author Share Posted March 13, 2007 Tommy, I have known a lot of people play this mod, cannot find file is because you do not have it. Were did you download it from? Update on Missions: Mission 01: Removed Soptlights x 2. for both versions Mission 02: Removed Invalid response for both versions Removed Console Command in Co-Op Mission 03: No Issues Mission 04: Added Counter Increment Mission 05 - 09 No Issues Mission 10: Pending investigation Notes: I have made a mission before that reduces the Fog to only 5M, on the training map. Every so often you here static, Fog hits 100M for a second or 2, then returns to 5M. This has caused CTD many times for some. Mission 11: Actor placement off map corrected. Mission 12: Begin recording added? Lightys Mission Funnel Web: Added a flag to allow responses in both blocks, however each cancelling there own state of Add Obj to the list, to ensure it is only added once. Pls post any thoughts. Tinker Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 15, 2007 Share Posted March 15, 2007 Tommy, I have known a lot of people play this mod, cannot find file is because you do not have it. Were did you download it from? Filefront. I downloaded Tuneup Utilites 2007 trial version awhile back and it fried my printer to the point that I had to reinstall the dang thing. It may have also deleted these textures as well. I'll never stray from CCleaner again. Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 20, 2007 Share Posted March 20, 2007 Ok, I completely redownloaded Centcom-reinstalled- and installed patchs 1 & 2. Along with a little something from a friend to make things run a little better. Everything was good in campaign mode until the very end of missions 3 & 4, all objectives completed, going from that screen to the stat screen showing any awards given and such. CTD at that point. ***** User's system configuration ***** CPU: GenuineIntel 1796 MHz Pentium 4 RAM: 512 MB O/S: Microsoft Windows 2000 5.1 Service Pack 2 build 2600 Ghost Recon (RELEASE) version = 1.4.0.0(0) RSDisplayMgr::CreateGameWindow: Creating a 1024x768 window at 0,0 on monitor Default Monitor attached to NVIDIA GeForce4 Ti 4600 RSDisplayMgr::CreateGameWindow: Game running on primary display Default Monitor attached to NVIDIA GeForce4 Ti 4600 HAL (hw vp): NVIDIA GeForce4 Ti 4600 R5G6B5 RSFILEDATA: FindFile could not find file ike_fx_fire_type2.tga RSFILEDATA: FindFile could not find file ike_fx_fire_type2.rsb Unable to find ike_fx_fire_type2.tga anywhere. RSFILEDATA: FindFile could not find file lighthalo_effect3.rsb RSFILEDATA: FindFile could not find file lighthalo_effect3.rsb Unable to find lighthalo_effect3.rsb anywhere. RSSoundMgrPC: Selecting sound device SoundMAX Digital Audio driver is smwdm.sys RSFILEDATA: FindFile could not find file darkmap0mainmenu.rsb RSFILEDATA: FindFile could not find file darkmap0mainmenu.rsb Unable to find darkmap0mainmenu.rsb anywhere. SOUND: Cannot Find: CEN_briefing.wav RSFILEDATA: FindFile could not find file darkmap0d_mainmenu.rsb RSFILEDATA: FindFile could not find file darkmap0d_mainmenu.rsb Unable to find darkmap0d_mainmenu.rsb anywhere. RSFILEDATA: FindFile could not find file 14-seal rifleman_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_a_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_b_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifle head_blink_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifle head_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifleman_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_a_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_b_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifle head_blink_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifle head_desert.rsb Loading map d:\red storm entertainment\ghost recon\mods\centcom mod\map\prison\prison.map RSFILEDATA: FindFile could not find file 14-seal rifleman_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_a_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifleman_b_desert.chr RSFILEDATA: FindFile could not find file 14-seal rifle head_blink_desert.rsb RSFILEDATA: FindFile could not find file 14-seal rifle head_desert.rsb Actor 493: I'M STUCK AT <7.90481, 55.7611, 1.78596> Failed to Reset Device Failed to Reset Device Again Quote Link to comment Share on other sites More sharing options...
GregV Posted March 20, 2007 Share Posted March 20, 2007 Install Tinker's patch (the last one, its in the download page of Centcom), it will probably fix all mod's bugs. Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 20, 2007 Author Share Posted March 20, 2007 RIGHT CLICK ME AND SAVE AS Anyone willing to test. Mission 03 had no unlock hero in script. I assume it is the issue? You will need to complete the mission again. Tinker Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 21, 2007 Share Posted March 21, 2007 Install Tinker's patch (the last one, its in the download page of Centcom), it will probably fix all mod's bugs. Perhaps you need to reread my post . Everything available is installed... Tinker, I was able to restart and complete mission 3 to the stat screen and no, there is no hero to unlock in that mission. As I stated in my previous post , the same thing happened at the end of mission 4. I also restarted that mission and completed it and it sucessfully went to the stat screen. I just wanted to let you know about these consecutive CTD's . Not complaining , just trying to be of assistance. Quote Link to comment Share on other sites More sharing options...
GregV Posted March 21, 2007 Share Posted March 21, 2007 (edited) Install Tinker's patch (the last one, its in the download page of Centcom), it will probably fix all mod's bugs. Perhaps you need to reread my post . Everything available is installed. Ok, but anyway there are still some issues, like in mission 7, the meeting wont end even after 1 hour of wait. Edited March 21, 2007 by GregV Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 21, 2007 Author Share Posted March 21, 2007 @ Tommy Sry, i am just not able to find these issues, have tried the campaign and all is ok here. @ Greg Did you have all of your team at the meeting? Tinker Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 21, 2007 Share Posted March 21, 2007 CTD'ing relentlessly on mission 4 to the point that I can't finish it. I'd post a screenshot from #4 showing some unusual shadowing, but I can't seem to figure out how to do it. Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 21, 2007 Author Share Posted March 21, 2007 CTD'ing relentlessly on mission 4 to the point that I can't finish it. I'd post a screenshot from #4 showing some unusual shadowing, but I can't seem to figure out how to do it. Oki Tommy just simply explain what you are doing at the time of CTD on mission 04? Not sure if you still mean at mission end and switching screens, or in mission? Tinker Quote Link to comment Share on other sites More sharing options...
Hammer Posted March 21, 2007 Share Posted March 21, 2007 F4 is the default screen shot key, the image can be found in the GR main folder Quote Link to comment Share on other sites More sharing options...
Tinker Posted March 21, 2007 Author Share Posted March 21, 2007 Maybe he is unsure what to do next with uploading it? Is he able to use the site for a piccy? Tinker Quote Link to comment Share on other sites More sharing options...
Toniezz Posted March 22, 2007 Share Posted March 22, 2007 (edited) CTD'ing relentlessly on mission 4 to the point that I can't finish it. I'd post a screenshot from #4 showing some unusual shadowing, but I can't seem to figure out how to do it. Shadowing in the form of vehicle and actor (enemy) shadows/ silhouettes like this? That is a known GR bug and is usually due to a certain way of mission scripting (hide character/vehicles). Don't shoot the shadows! Sometimes a video driver issue can also cause it (very unlikelly). What are your current video drivers? Maybe update them if needed? I am really puzzled with your issues Tommy. I really have none of the problems you have and I have: 1. Downloaded the 'Centcom_Mod.7z' file from here (Rocky' Filefront). 2. Patched it accordingly with the 'missionsv3.0.zip' patch and 3. Just recently applied Tinker' 'mission fixes'. Every patch I made sure I overwrited the existing mission files (not replacing the mission folder). I hope you figure it out in the end! Edited March 22, 2007 by Toniezz Quote Link to comment Share on other sites More sharing options...
Tommy35 Posted March 22, 2007 Share Posted March 22, 2007 The shadowing is ocurring on the ground inside the prison walls but in the open ground where there should not be any. The screenshot I've got , posting it here is the problem. It would clearly show what I'm talking about. Everything is installed per plan. I've never tried shooting at a shadow , I thought the point was to dust the baddies It's CTD'ing at the end before it goes to the stat screen and sometimes during the mission whilst not shooting shadows (sorry but that is a bit funny) but around the odd shadowing which I've not seen on any other map , Centcom or otherwise. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.